Production News
-
What should notice when installing the butt weld pipe fittings?
When installing butt weld pipe fittings, it’s important to pay attention to several key factors: Proper alignment: Ensure that the pipes and fittings are properly aligned before welding to prevent misalignment and potential leaks. Cleanliness: Thoroughly clean the pipe ends and fittings to remove...Read more -
How To Use Eccentric Reducer
To use an eccentric reducer, follow these steps: Measure the pipe sizes: Determine the size of the larger and smaller pipes that you need to connect using the eccentric reducer. Select the appropriate eccentric reducer: Choose an eccentric reducer that matches the size of the larger and smaller p...Read more -
Flat Flange
Flat welding flange refers to a flange that is connected to a container or pipe using a fillet weld. It is an arbitrary flange. During design, according to the integrity of the connection between the flang e ring and the straight section, the flange is checked as an integral or loose flan...Read more -
GI Galvanized Steel 90Deg Socket Weld Elbow
galvanized steel 90-degree socket weld elbow.” This item is typically used in plumbing and piping systems to change the direction of flow by 90 degrees, particularly in applications where welding is a preferred method of connection. - Material: Galvanized steel is used for this elbo...Read more -
Detailed introduction to flanges
Wn Forged Carbon Flat FF Plate Pipe Fitting Stainless Steel Slip on Blind Welding Neck Flange 1.Material:Carbon steel A105/Rst37.2/C22.8/Q235 Stainless steel 304/304L,316/316L,321,ect. 2.Size:1/2″-24″ 3.Pressure:150lbs-2500lbs PN0.6-PN16.0 4.Facing:RF/RJ/ FF 5.Standard:ANSI(ASME)16.5...Read more -
Butt Weld Pipe Fitting
Butt Weld Pipe Fitting A butt weld pipe fitting is a type of fitting used for connecting pipes in a piping system. It is welded to the end of the pipe to create a strong and leak-proof joint. Butt weld fittings are commonly used in industries that require high pressure, high temperature, or cor...Read more -
Duplex Reducing Tee S31803
Duplex stainless steel reducing tee is a type of pipe fitting used in piping systems to connect three sections of pipes of different sizes. The ‘tee’ is shaped like the letter ‘T’ and has two outlets at 90 degrees from the main line, which is why it’s also ca...Read more -
45Deg 6000PSI NPT Elbow
“6000psi NPT 45deg elbow” refers to a specific type of pipe fitting used in high-pressure applications. 6000psi: This indicates the pressure rating of the elbow fitting. In this case, it is designed to withstand pressures up to 6000 pounds per square inch (psi). This high pressure ra...Read more -
What is the principle of pickling pipe fittings?
Iron oxides (Fe3O4, Fe2O3, FeO, etc.) such as scale and rust react chemically with the acid solution to form salts that are dissolved in the acid solution and removed. Commonly used acids Acids used for pickling include sulfuric acid, hydrochloric acid, phosphoric acid, nitric acid, chromic acid...Read more -
Pipe Nipples and Coupling
Pipe nipples and couplings are essential components in plumbing and piping systems. Pipe Nipples: Definition: Pipe nipples are short lengths of pipe with male threads on both ends. They are used to connect two female threaded fittings or pipes. Types: Pipe nipples come in various materials such a...Read more -
What is the function of the tee?
What is the function of the tee? 1. The function of the tee: to prevent leakage of the pipeline and act as a seal. The main function of the tee is to change the direction of the fluid. 2. Tee: Generally used at the end of the pipeline to block the pipeline. Tees are pipe fittings and pipe connec...Read more -
Female 3000PSI NPT Equal Tee
A female NPT equal tee with a pressure rating of 3000 psi is a type of pipe fitting that has three female NPT (National Pipe Taper) threaded connections and is designed to handle pressures of up to 3000 pounds per square inch (psi). This type of tee fitting is commonly used in high-pressure pipi...Read more