Production News
-
Pipe Reducer 6″*4″ SCH40 A234WPB ASME B16.9
A pipe reducer is a fitting used to connect two pipes of different diameters, allowing for a smooth transition from a larger pipe to a smaller one. Specifications: - Type: Concentric or Eccentric Reducer (depending on your application) - Size: 6 inches (larger end) to 4 inches (smaller end) - Mat...Read more -
Pipe Flange ASME B16.5 CLASS150 5″
A pipe flange made of A105 material, class 150, and with a size of 5 inches, conforms to the ASME B16.5 standard. Material: -A105: This is a carbon steel material commonly used for flanges, fittings, and valves in piping systems. It is suitable for high-temperature and high-pressure applications....Read more -
Introduction of Bends
Bends are bent using a complete set of bending dies. No matter what kind of machinery and equipment, most of them use bends. We produce bends using the most advanced technology. Our bends include carbon steel bends, alloy bends , stainless steel elbow, low temperature steel elbow, high-perfo...Read more -
Different radius elbow
1. Long radius elbow Carbon Steel: ASTM/ASME A234 WPB-WPC, ST37, Alloy: ST52, 12CrMo, 15CrMo, WP 1-WP 12, WP 11-WP 22, WP 5-WP 91-WP 911 Stainless Steel: ASTM/ASME A403 WP 304- 304L-304H-304LN-304N ASTM/ASME A403 WP 316-316L-316Ti… 2. Short radius elbow Carbon Steel: ASTM/ASME A234 ...Read more -
Carbon Steel Pipe Flange 150 LB
A 150LB carbon steel pipe flange is a type of flange used in piping systems to connect two sections of pipe or to connect a pipe to a fitting, valve, or other equipment. The “150LB” designation refers to the flange’s pressure rating, which is based on the American National Stand...Read more -
Steel Pipe Nipple
A steel pipe nipple is a short length of pipe, typically made of steel, with threaded ends that allow it to be connected to other pipes or fittings. It is commonly used in plumbing, gas, and industrial applications to connect two other fittings or pipes in a straight line. Key Features of Steel P...Read more -
Steel Pipe Cap
A steel pipe cap is a type of fitting used to seal the end of a pipe. It is typically made from various grades of steel, including carbon steel, stainless steel, and alloy steel, depending on the application and environmental conditions. Types of Steel Pipe Caps: 1. End Caps: Used to close the en...Read more -
Steel Pipe Tee
A steel pipe tee is a type of fitting used in piping systems to connect three sections of pipe. It has a T-shaped design, allowing for the flow of fluid in two directions while also providing a branch connection. Types of Steel Pipe Tees: 1. Equal Tee: All three ends have the same diameter, allow...Read more -
Carbon Steel Flanges: A Comprehensive Guide
Introduction Carbon steel flanges are essential components in piping systems, used to connect pipes, valves, pumps, and other equipment. They provide a reliable and leak-proof connection, making them crucial in various industries, including oil and gas, chemical processing, water treatment, and c...Read more -
Steel Pipe Elbow
A steel pipe elbow, often referred to as a “long radius elbow” or “short radius elbow,” is a type of fitting used in piping systems to change the direction of the flow. Types of Pipe Elbows: 1. Long Radius Elbow (LR): - Has a radius that is 1.5 times the diameter of the pi...Read more -
Steel Pipe Reducer
A steel pipe reducer is a fitting used in piping systems to connect two pipes of different diameters. It allows for a smooth transition from a larger diameter pipe to a smaller diameter pipe (or vice versa) while maintaining the flow of fluid or gas through the system. Reducers are commonly used ...Read more -
Steel Elbow
A steel elbow is a type of fitting used in piping systems to change the direction of the flow of fluids or gases. It is typically made from various grades of steel, including carbon steel, stainless steel, and alloy steel, depending on the application and the environment in which it will be used....Read more