Cheapest Price Duct Connector Flange - Industrial Steel Blind Flange – Cangrun Pipeline
Cheapest Price Duct Connector Flange - Industrial Steel Blind Flange – Cangrun Pipeline Detail:
SIze
Blind Flange: 3/8″～100″
DN10～DN2500
Pressure
American Series: CLASS 150, CLASS 300, CLASS 400, CLASS 600, CLASS 900, CLASS 1500, CLASS 2500
European Series: PN 2.5, PN 6, PN 10, PN 16, PN 25, PN 40, PN 63, PN 100, PN 160, PN 250, PN 320, PN 400
Flange Facing Types
American Series:Flat Face (FF), Raised Face (RF), Groove (G), Female(F), Ring Joints Face(RJ)
HEBEI CAGNRUN PIPELINE EQUIPMENT CO.,LTD,is an ISO9001:2000 approved manufacturer of blind flange .We are located in Cangzhou City, Hebei Province, where we have access to complete infrastructure facilities. The logistic is quite low here.
Product detail pictures:
Related Product Guide:
We not only will try our greatest to offer superb companies to just about every buyer, but also are ready to receive any suggestion offered by our shoppers for Cheapest Price Duct Connector Flange - Industrial Steel Blind Flange – Cangrun Pipeline , The product will supply to all over the world, such as: Hungary, Yemen, Mexico, Since always, we adhering to the "open and fair, share to get, the pursuit of excellence, and creation of value"values, adhere to the"integrity and efficient, trade-oriented, best way , best valve" business philosophy. Together with our all over the world have branches and partners to develop new business areas, maximum common values. We sincerely welcome and together we share in global resources, opening up new career together with the chapter.
By EliecerJimenez from Pakistan - 2018.06.21 17:11
A good manufacturers, we have cooperated twice, good quality and good service attitude.
By Henry stokeld from Cape Town - 2018.05.15 10:52
Related products
-
Massive Selection for Pipe End Cap - High Freq...
SIze Welding Steel: 1/2” ～48”, DN15～DN1200 OD21.3MM～1219.2MM Industrial Processes Hot rolled,hot expanded,cold drawn,and hot galvanized Application Our ERW steel pipes are widely used in many industries,such as petroleum,power generation,natural gas,chemicals,shipbuilding,papermaking,and metallurgy,etc. HEBEI CAGNRUN PIPELINE EQUIPMENT CO.,LTD .is an experienced ERW steel pipe manufacturer and supplier based in China. We have been manufacturing high quality, low-cost industr...
-
Hot Sale for 304 Butterfly Valve - Wedge gate ...
Function And Specification Type Nominal pressure(Mpa) Test pressure(Mpa) Applicable temperature(°C) Applicable media Strength(water) Seal(water) Z41T-10 1 1.5 1 -10-200°C Water, ≤1.0Mpa Steam Z41W-10/Z41H-10 1 1.5 1 -10-100°C Oils Z41T-16Q 1.6 2.4 1.76 -10-200°C Water, ≤1.0Mpa Steam Z41W-16Q 1.6 2.4 1.76 -10-100°C Oils Outline And Connecting Measurement Model Nominal diameter Size...
-
Manufacturing Companies for Butterfly Valve Act...
Function And Specification Type Nominal pressure(Mpa) Test pressure(Mpa) Applicable temperature(°C) Applicable media Strength(water) Seal(water) Z45X-10Q 1 1.5 1.1 1-80°C Water Z45X-16Q 1.6 2.4 1.76 1-80°C Water Z45X-25Q 2.5 2.75 3.75 1-80°C Water Outline And Connecting Measurement Model Nominal diameter Size mm L D D1 D2 b f Z-φd φ1 Z45X-10Q/16Q 50 178±1.5 165 ...
-
Personlized Products 1.5 Inch Flange - Indust...
SIze of slip on weld flange Slip on weld flange: 3/8″～40″ DN10～DN1000 Pressure American Series: CLASS 150, CLASS 300, CLASS 400, CLASS 600, CLASS 900, CLASS 1500, CLASS 2500 European Series: PN 2.5, PN 6, PN 10, PN 16, PN 25, PN 40, PN 63, PN 100, PN 160, PN 250, PN 320, PN 400 Flange Facing Types American Series:Flat Face (FF), Groove (G), Ring Joints Face(R) HEBEI CANGRUN PIPELINE EQUIPMENT CO.,LTD.is a professional slip on weld flange manufacturer and supplier,...
-
Hot-selling Steel Tee - Steel pipe nipple R...
We supply both black and galvanized welded steel nipples in 15 diameters from 1/8″ to 6″ and with different lengths ranging from Close up to 12″. Available individually or in pre-packaged assortments, we also offer a full selection of ready cut welded steel pipes in the same diameters lengths ranging from 18″ up to 72″. All galvanized are zinc coated for use in water applications complying with the NSF 372 lead-free requirements. • Steel nipples meet material: AN...
-
2021 Good Quality Ductile Iron Pipe Fittings -...
description Carbon steel, low alloy steel, stainless steel, including some non-ferrous metal materials, such as copper, aluminum, titanium, etc. Due to the use of pressing spools after heating, the tonnage of equipment required for material forming is reduced. The adaptability of hot-pressing spools to materials is relatively high. Wide, suitable for low carbon steel, alloy steel, stainless steel materials; especially for large diameter and thick wall spools, this forming process is usua...